120W – 240W mixer-amplifier with 4 electronically balanced MIC inputs on screw clamps with micro- switch phantom voltage, 2 AUX inputs on RCA connections for medium and high stereo sources lines. There is a muting clamp and an EMC clamp for maximum priority on the other inputs. For the use of BM1 microphone unit, add the article CDINRJ45 (code 1800-303010).
Electronic Ding-Dong incorporated. Unbalanced stereo output on RCA connectors. It is also provided with separated volume controls for each channel, general tone control, master volume and LED signal indicators for: active signal, peak, protection and power supply.
It has got FM/AM radio, USB reader, SD card reader and Bluetooth receiver.
Power outputs for constant impedance and constant voltage lines.
Standard support for rack installation included.
Size: 1 r.u.
A120MD
120W class D mixer amplifier with music source
Additional information
| RMS power |
120W(A120MD) – 240W(A240MD) |
|---|---|
| Frequency response |
80Hz~16KHz (+1dB, -3dB) |
| THD |
≤ 0.05% (at 1KHz, 1/3 rated power) |
| Constant imp. speakers outputs |
4 Ω, 16 Ω |
| Constant volt. speakers outputs |
100V |
| Protections |
Overheating, overload, short circuit |
| Signal LED |
signal, peak, protection, power |
| Signal/noise ratio |
(MIC 1,2,3) ≥ 66dB – (AUX1,2) ≥ 85dB |
| AUX input sensitivity |
350mV±20mV/10KΩ |
| MICRO input sensitivity |
5mV±1mV/600Ω |
| Phantom power supply |
24Vdc |
| Power voltage |
230Vac – 50÷60Hz |
| Power consumption |
160VA(A120MD) – 300VA(A240MD) |
| Dimensions (WxHxD) |
484x300x44mm |
| Colour |
black |
| Weight |
4,7Kg(A120MD) – 5,2Kg(A240MD) |
