120W – 240W mixer-amplifier with 4 electronically balanced MIC inputs on screw clamps with micro-switch phantom voltage, 2 AUX inputs on RCA connections for medium and high stereo sources lines. There is a muting clamp and an EMC clamp for maximum priority on the other inputs. For the use of BM1 microphone unit, add the article CDINRJ45 (code 1800-303010). Electronic Ding-Dong incorporated. Unbalanced stereo output on RCA connectors. It is also provided with separated volume controls for each channel, general tone control, master volume and LED signal indicators for: active signal, peak, protection and power supply. It has got FM/AM radio, USB reader, SD card reader and Bluetooth receiver. Power outputs for constant impedance and constant voltage lines. Standard support for rack installation included. Size: 1 r.u.
Additional information
| RMS power | 120W(A120MD) – 240W(A240MD) |
|---|---|
| Frequency response | 80Hz~16KHz (+1dB, -3dB) |
| THD | ≤ 0.05% (at 1KHz, 1/3 rated power) |
| Constant imp. speakers outputs | 4 Ω, 16 Ω |
| Constant volt. speakers outputs | 100V |
| Protections | Overheating, overload, short circuit |
| Signal LED | signal, peak, protection, power |
| Signal/noise ratio | (MIC 1,2,3) ≥ 66dB – (AUX1,2) ≥ 85dB |
| AUX input sensitivity | 350mV±20mV/10KΩ |
| MICRO input sensitivity | 5mV±1mV/600Ω |
| Phantom power supply | 24Vdc |
| Power voltage | 230Vac – 50÷60Hz |
| Power consumption | 160VA(A120MD) – 300VA(A240MD) |
| Dimensions (WxHxD) | 484x300x44mm |
| Colour | black |
| Weight | 4,7Kg(A120MD) – 5,2Kg(A240MD) |
